| Availability: | |
|---|---|
| Quantity: | |
NY-JLRX/GBF-200/25
4E
The Standard Carbon Fiber Composite Core (CFCC) is an advanced load-bearing component meticulously engineered to replace traditional steel cores in overhead conductors (such as ACCC). Featuring a twisted structure of 3, 4, 5, 7, or 19 strands with diameters ranging from 5.0 mm to 11.5 mm, it offers an exceptional strength-to-weight ratio.
By significantly reducing the total conductor weight while delivering high Ultimate Tensile Strength (UTS), this core minimizes tower loading, enhances transmission capacity, and ensures long-term structural integrity under high-temperature operations. It is the ideal cost-effective solution for standard new-build transmission lines and general capacity upgrades.
Exceptional Strength-to-Weight Ratio: Combining superior tensile strength with an ultra-lightweight profile, this core significantly reduces the total conductor weight while providing exceptional UTS, thereby minimizing tower loading.
Thermal Stability & Anti-Creep: As the primary load-bearing component, the core rod features a near-zero thermal expansion coefficient (CTE) and excellent anti-creep properties, ensuring structural integrity during long-term high-temperature operations.
Precision Composite Engineering: The composite design of glass and carbon fibers enhances interlaminar shear strength and dielectric protection while maintaining peak core tension.
High-Temperature Endurance: Allows the conductor to operate continuously at temperatures up to 200°C, dramatically increasing ampacity compared to traditional ACSR (limited to 90°C).
New Overhead Transmission Lines: Ideal for EHV/HV lines requiring optimized tower design and reduced construction costs.
Capacity Upgrades: Perfect for replacing old ACSR conductors to increase power transmission capacity on existing right-of-ways.
Tower Load Reduction: Best choice for areas where the mechanical load on towers (due to wind or ice) must be minimized.
Standard Terrain Routing: Highly cost-effective for inland routes where extreme corrosion or ultra-low sag constraints are not the primary issues.
Parameter | Standard CFCC Specification |
Available Strands | 3, 4, 5, 7, 19 |
Core Diameter Range | 5.0 mm - 11.5 mm |
Material Composition | Carbon Fiber & Glass Fiber Composite |
CTE (Thermal Expansion) | Near-Zero |
Max Continuous Operating Temp | Up to 200°C |
Standard Packaging | 55D Large-diameter Reels |
How to choose the right core for your specific project?
Feature / Parameter | Standard CFCC (This Product) | Aluminum Cladded CFCC | Invar-Steel Cladded CFCC |
Primary Advantage | Ultra-Lightweight & High Strength | Anti-Corrosion & Flexibility | Ultra-Low Sag & Extreme Weather |
Outer Layer | None (Bare Carbon/Glass) | High-Conductivity Aluminum | 4J36 Iron-Nickel (Invar) Alloy |
Corrosion Resistance | Moderate (Relies on outer aluminum strands) | Excellent (Eliminates galvanic corrosion) | Excellent (Shields carbon fiber) |
Bending Performance | Standard Rigidity | Enhanced (Multi-strand design) | High Rigidity |
Sag Control | Very Low Sag | Very Low Sag | Absolute Minimum Sag (Ultra-low CTE) |
Best Applied In | General new-build lines, cost-effective upgrades. | Coastal/industrial zones, high humidity, easy installation. | Long-span crossings, extreme ice/cold, strict clearance. |
Project Background: A 100km, 220kV transmission line upgrade in Southeast Asia needed to double its transmission capacity without rebuilding existing towers. The utility selected ACCC conductors utilizing our Standard CFCC (450/60) to replace traditional ACSR (400/25).
Data-Driven Results:
Parameter | Traditional ACSR (400/25) | CFCC Conductor (450/60) | Outcome & Benefit |
Outer Diameter (mm) | 26.64 | 26.39 | Similar diameter, no tower modification needed. |
Tensile Strength (kN) | 96 | 154.5 | +60% Higher Strength for better safety margins. |
Resistance (20°C, Ω/km) | 0.0737 | 0.0617 | Lower resistance reduces line loss. |
Current Capacity (A) | 828 (at 90°C) | 1723 (at 200°C) | More than double ampacity achieved. |
Max Heat Sag (meters) | 7.03 (at 90°C) | 6.31 (at 200°C) | Lower sag despite operating at much higher temps. |
Standardized Coiling Control: Due to the material's high rigidity and single-rod structural integrity, it is highly recommended to be coiled on large-diameter reels (55D).
This ensures the preservation of its mechanical properties and long-term fatigue resistance during transportation and installation. Avoid dropping the reels or subjecting them to severe impacts.
Q1: What is the primary difference between Standard CFCC and the Aluminum Cladded version?
The Standard CFCC is the bare carbon/glass composite core, offering the best cost-to-performance ratio for general inland installations. The Aluminum Cladded version adds a protective aluminum outer layer, which is specifically designed to prevent galvanic corrosion in coastal or industrial areas and offers better bending flexibility.
Q2: Can I use standard conductor fittings (dead-ends and splices) with this core?
No. Because the carbon fiber core has different mechanical properties (high tensile strength but specific radial compression limits), it requires specialized fittings (such as wedge-type or preformed dead-ends) designed specifically for composite cores. Standard compression fittings for steel cores will damage the core.
Q3: How does the CFCC perform in extreme cold?
While it performs well in general climates, if your project is in an area with extreme cold (-80°C) or heavy ice loads where absolute minimum sag is required to prevent cross-line faults, we highly recommend the Invar-Steel Cladded version.
Q4: Why must the core be shipped on a 55D large-diameter reel?
The carbon fiber composite core is highly rigid. Winding it on a reel that is too small can cause micro-fractures in the composite material, compromising its tensile strength and long-term fatigue resistance. The 55D reel ensures a safe bending radius during transport.